翰修堂KN95口罩

Fitting Instructions:

There are pictures on back of each poly bag of the KN95 masks, showing the fitting steps

1. Keep the face mask clean before use. Do not touch the rear side of the face mask.
2. Open face mask. Hold the face mask to cover nose and mouth, and pull each ear loop with each hand to wear.
3. Ensure the face mask fit to face, by adjusting the nose piece, keeping mask edge close to face.

1. Before use the masks first verify that it is suitable for the intended use. The wearer must be adequately trained prior to use and ensuring the masks are proper fit.
2. The mask is disposable and cannot be reused.
3. Using the masks with facial hair will cause leakage problem, if the facial hair not covered, unlikely to achieve seal.
4. Discard and replace the mask if it becomes damaged or higher breathing resistance.
5. Don’t use the mask in explosive gas, heavily polluted environment, oxygen-deficient environment, fire environment and the underwater work.
6. Patients with heart disease or other disease should discard it after wearing uncomfortably.
7. Masks marked ‘’ NR’’ shall not be used for more than one shift.
8. This product does not supply oxygen. Use only in adequately ventilated areas containing sufficient oxygen to support life. Do not use this respirator when oxygen concentration is less than 19.5%.
9. Do not use in explosive atmospheres.
10. It is strictly prohibited to use after the package is damaged.

1. keep in cool place. Avoid sunlight and heat source. Avoid press or damage of box.
2. Keep in place with humidity less than 80%, no corrosive gas and well-ventilated clean room.
3. The temperature range of storage conditions -30℃to +40℃

1. Apply the respirator on face and hang the ear loops on ears.
2. Press nose clip and make the respirator fixed on nose.
3. Adjust the mask and nose clip to make the respirator cling to your face and nose tightly.

	Single use		Keep out of direct sunlight
	Maximum relative humidity of storage conditions		The temperature range of storage conditions
	See the information provided by the manufacturer	2163	CE mark and Notified Body No